Day 1 |
1:30 – 3:00 |
Overview of Deepwater Riser Technology (Stanton) |
3:00 – 3:15 |
Coffee Break |
3:15 – 4:15 |
Fundamentals of Riser Engineering (Kavanagh) |
4:15 – 4:45 |
Riser Design Codes and Regulations (Stanton) |
Day 2 |
8:00 – 9:20 |
Riser Functional Requirements and Design Drivers (Kavanagh) |
9:20 – 9:35 |
Coffee Break |
9:35 – 10:25 |
Riser Design Methods (Song) |
10:25 – 11:05 |
Riser System Analytical Tools (Song) |
11:05 – 11:20 |
Coffee Break |
11:20 – 12:30 |
Riser System Design Basis Development (Song) |
12:30 – 1:30 |
Lunch |
1:30 – 2:55 |
TTR Analysis and Design (Stanton) |
2:55 – 3:10 |
Coffee Break |
3:10 – 3:45 |
TTR Component Design (Wald) |
3:45 – 5:00 |
Hybrid Riser Analysis and Design (Wald, Song) |
Day 3 |
8:00-9:45 |
Riser Materials, Fabrication, Welding and NDE (Boster) |
10:00 |
Depart for technical visit to RTI, 7211 Spring Cypress Road,
Spring, TX 77379 |
10:35 |
Arrive RTI |
12:35 |
Depart RTI – boxed lunch to be served on bus |
1:10 |
Arrive back at hotel |
1:30 – 3:00 |
Drilling Riser Analysis and Design (Shilling) |
3:00 – 3:15 |
Coffee Break |
3:15 – 4:45 |
Drilling Riser Analysis and Design – cont’d |
Day 4 |
8:00 – 9:00 |
Flexible Riser Analysis and Design (Balch) |
9:00 – 9:15 |
Coffee Break |
9:15 – 10:45 |
SCR Analysis and Design Methods (Song) |
10:45 - 11:00 |
Coffee Break |
11:00 – 11:45 |
SCR Analysis and Design Methods – cont’d |
11:45 – 12:45 |
Lunch |
12:45 – 1:45 |
SCR Component Design (Song) |
1:45 – 2:00 |
Coffee |
2:00 – 3:30 |
Umbilicals (Madden) |
3:30 – 3:45 |
Coffee |
3:45 – 4:30 |
Riser Installation Engineering (Song) |
Day 5 |
8:00 – 9:30 |
Example Design Calculations (Song) |
9:30 – 9:45 |
Coffee Break |
9:45-11:45 |
Interactive Design Exercise (Song) |
11:45-12:45 |
Lunch |
12:45 - 1:45 |
Deepwater Riser Projects and Lessons Learned (Kavanagh) |
1:45 |
Summary and Closing Remarks (Song) |
