Toggle Menu

Pipeline Defects Repair Workshop
Led by Sergio Limón and Michael J. Rosenfeld
April 24-25, 2024 | PRCI’s Technology Development Center | Houston

Register before April 10, 2024 and save $100!

Day 1
  8am-4:30pm CDT  Course
Day 2
  8am-4:30pm CDT  Course

This course will be held at
PRCI’s Technology Development Center
in Houston.

OVERVIEW

Imperfections and defects may be found in pipelines associated with the inherent steel making process, line pipe manufacturing, pipeline construction or introduced during its operation. Not all imperfections and defects are injurious to the safe operation of pipelines and established engineering methods exist for performing engineering assessments to make such determination. Those defects that are injurious require repair. The operator must then choose from a wide selection of repair methods considering regulations, industry guidance, repair effectiveness, and practical details.

OBJECTIVES

To demonstrate existing and new Repair technologies and their application for specific defects uncovered during the defect assessment and NDE phases of pipeline rehabilitation.

COURSE DOCUMENTATION

Complete course presentation material will be available as a PDF download prior to the course.

CONTINUING EDUCATION UNITS

Upon completion of the course, participants will be eligible to receive 1.2 Continuing Education Units.

WHY YOU SHOULD ATTEND

This course will cover assessment methods and repair options for the most common pipeline imperfections and defects. PHMSA repair regulations and industry Codes ASME B31.8 and B31.4 associated with pipeline repairs will be discussed. The course will address pre-NDE activities, field NDE defect evaluation, engineering assessment, repair criteria, repair selection and installation. Hands-on NDE and repair installation demonstration are part of the workshop.

WHAT YOU WILL LEARN

Led by Sergio Limon and Mike Rosenfeld, you will learn:

  • How common defects form in pipelines and the mechanisms that can make them grow
  • Non-destructive evaluation methods and technologies, and hands-on demonstration of their applications
  • Engineering methods and models for assessing the severity of defects
  • Criteria in PHMSA regulations and ASME codes for determining injurious defects that need remediation
  • Definitions of temporary and permanent repairs
  • Pipeline pressure reduction guidelines prior to and during defect evaluation and repair
  • Repair methods: buffing/grinding, Type B and A metallic sleeves, compression sleeves, composite sleeves, mechanical bolt-on clamps, and emerging repair sleeve systems
  • Hands-on demonstration of most common repair systems

WHO SHOULD ATTEND

The course is intended for practicing pipeline professionals who are involved with the field defect evaluation, engineering assessment, and onsite repair preparation and installation activities; these include pipeline engineers and operators, bell hole support specialists, excavation inspectors, NDE service providers, repair manufacturers, ILI analysts and field support team.

 Organized by:

Clarion Technical Conferences